GX16 Connector Data Sheet

1. Definition

As the name implies, aviation plugs and sockets connectors are connector components used in the aerospace industry and are the common name for connectors in this industry. In the aerospace field, countless connectors are used for power transmission and signal transmission, and the range of products is extensive. GX series is one of them.

Therefore, aerospace plugs and sockets do not refer to one type of plug and socket.
Different connector manufacturers used in the aerospace field of connectors are also different. For example, Amphenol AISG, Binder M12, M16, Wipro, etc. Therefore, this article mainly recognizes the GX series of aviation plugs and sockets.

2. Application

GX series is suitable for electrical connection between instruments and electronic equipment, the interconnection between wires and cables, or wall partitions.

GX series threaded connection, stable electrical conductivity and specific waterproof function, safe and reliable, first applied in the aviation field, to meet the requirements of mobile or vibration environment.

With the development of production technology and cost reduction, it has begun to be commonly used in the civil field. It has been widely used in aviation, computer, communication, oil exploration, navigation, anti-theft device, transportation, machinery, and electronics.

Shipping
Oil Exploration
Mechanical Electronics
application

CCTV Security System

Rear View Camera

Vision System

Communications

3. Product Appearance

There are three types of GX16 series appearances:

Plug Appearance  (Female Plug with Pole ), including straight and right angle plug

gx Straight
Straight
gx Right Angle
Right Angle

Socket Appearance (Male Socket with Pin), including circular round type, flange type

front mount
Circular round type-front mount
back mount
Circular round type-back mount
3 hole flange
Flange type-3 hole flange
4 hole flange
Flange type-4 hole flange

Butt-Joint Type Appearance(Male Plug with Pin)

detail

Connection Diagram:
a.Standard Type

Standard Type

b.Butt-Joint Type

Butt-Joint Type

c.Reverse Type

Reverse Type

4. Product Categories

The GX series has different models according to the panel opening size. The typical products are GX12, GX16, GX20, GX25, GX30, GX35, GX40, etc. They are the same appearance but different dimensions.
GX12 Connector with 12mm thread, Pin Contacts: 2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin.

gx12

GX16 Connector with 16mm thread, Pin Contacts: 2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin.

gx16

GX19/GX20 Connector with 19mm thread, Pin Contacts: 2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin, 11Pin, 12Pin.

gx20

GX25 Connector with 25mm thread, Pin Contacts: 2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin, 11Pin, 12Pin.

gx25

GX30 Connector with 30mm thread, Pin Contacts: 2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin, 12Pin, 14Pin.

gx30

Leave a Reply

Your email address will not be published. Required fields are marked *