M Series Connectors
Are lightweight triplestart ratchet coupling type connectors designed for avionics, aerospace, Harsh Environment
Connectors, security, motorsport and heavy duty applications.
Modern industrial automation systems rely on reliable connections between sensors, actuators, controllers, and other field devices. From factory production lines to packaging machines, these connections need to transmit signals and power while withstanding vibration, moisture, and demanding operating conditions.
The M12 A-coded 4-pin connector is one of the commonly used connection solutions for industrial sensors and actuators. With its compact circular design, threaded locking mechanism, and four electrical contacts, it provides a practical interface for many industrial signal and low-voltage power applications.
Renhotec offers different M12 A-coded 4-pin configurations, including field-wireable male plugs, panel-mount female receptacles, and shielded or unshielded cable options.
The short version. An A-coded 4-pin M12 carries 24 V power plus switching signals between a sensor or solenoid valve and the control cabinet. Choose field-wireable when the cable is already in place and only the plug needs replacing. Choose panel-mount when the joint has to sit on an enclosure wall or in a volume build. Choose shielded only when the run shares a tray with drive power.
An M12 A-coded 4-pin connector is a circular industrial connector with a 12 mm threaded coupling interface and four electrical contacts.
The A-coding keyway helps ensure correct mating with compatible A-coded connectors. It is commonly used for sensor signals, actuator connections, and industrial control applications.
Unlike D-coded M12 connectors, which are primarily designed for industrial Ethernet, A-coded connectors are widely used for general-purpose signal and power connections.
Key Features:
M12 A-coded 4-pin connectors are particularly useful when equipment needs a compact, secure, and standardized connection between field devices and control systems.

M12 A-coded 4-pin connectors are frequently used in factory automation and industrial equipment where reliable sensor and actuator connections are required.
Here are three typical application areas.
Proximity sensors, photoelectric sensors, and other detection devices use M12 connectors to connect with controllers and industrial I/O modules.
A 4-pin configuration can support common DC sensor wiring, including power supply, ground, and one or more signal functions, depending on the sensor design.
Actuators, solenoid valves, and other industrial components require electrical connections for power and control signals.
M12 A-coded 4-pin connectors provide a compact interface that can simplify equipment wiring and maintenance.
Automated production lines often contain numerous sensors and actuators installed throughout the machinery.
M12 connectors help standardize these connections and make device replacement or maintenance more convenient.
Understanding the pin assignment is important when selecting or assembling an M12 A-coded 4-pin connector.
A common wiring arrangement for industrial DC sensors is shown below.
| Pin | Common Wire Color | Typical Function |
|---|---|---|
| Pin 1 | Brown | L+ / Positive Supply |
| Pin 2 | White | Additional Output / Auxiliary Signal |
| Pin 3 | Blue | L- / 0V Ground |
| Pin 4 | Black | Switching Output / C-Q |

How does the wiring work?
For a typical three-wire DC sensor, Pin 1 provides the positive supply, Pin 3 provides the 0V return, and Pin 4 carries the switching signal.
Pin 2 may be used for a second output, an auxiliary function, or left unused, depending on the device.
For example, certain PNP and NPN proximity sensors use Pin 4 as their main switching output. IO-Link-compatible devices may use Pin 4 for C/Q communication.
Always check the equipment datasheet and wiring diagram before connecting. The actual pin functions can differ between sensor types and manufacturers.
The installation method is one of the most important differences between M12 A-coded 4-pin products.
Renhotec offers both field-wireable connectors and panel-mount receptacles to suit different equipment installation requirements.
A field-wireable connector allows users to attach the connector to a cable directly at the installation site.
This is particularly useful when standard cable lengths do not meet the actual installation requirements.
Typical Configuration:
Why choose this type?
Renhotec Product Recommendation

M12 Male Field Assembly Plug 4 Pos A Code Straight Screw Contacts
This M12 A-coded 4-pin male field-assembly connector features a straight design, screw termination, and an unshielded configuration. Its published product specifications include IP67 protection, 4A rated current, and 250V rated voltage.
A panel-mount receptacle is designed to be fixed directly to an equipment enclosure, machine housing, or control cabinet.
The female connection interface is accessible from the outside, while the rear contacts or wire leads connect to internal electrical circuits.
Typical Configuration:
Why choose this type?

M12 A-Coded 4 Pin Female Panel-Mount Receptacle
Renhotec offers M12 female panel-mount and bulkhead connector configurations, including solder-type and cable-connected solutions.
For equipment manufacturers who need a convenient internal wiring solution, a panel-mount receptacle with pre-attached wire leads is another practical option.
Compared with a connector requiring separate soldering or internal assembly, pre-attached leads can simplify the connection to terminal blocks or internal equipment circuits.
The 1m cable option is useful when the panel connector needs to reach an internal terminal or control module.

The available configurations in Renhotec’s hot-selling product selection include:
Another important consideration is whether to choose a shielded or unshielded M12 connector.
The choice usually depends on the electromagnetic environment and the overall cable installation.
| Comparison | Shielded Connector | Unshielded Connector |
|---|---|---|
| Shield Structure | Metal shielding or conductive shield path | No dedicated cable shielding path |
| EMI Consideration | Helps control electromagnetic interference | Suitable where EMC requirements are met without connector shielding |
| Typical Environment | Equipment near motors, drives, or electrical interference sources | General industrial installations with suitable EMC conditions |
| Installation | Requires proper shield continuity and grounding design | Simpler connection structure |
| Selection Priority | EMC performance | Installation simplicity and cost |
When should you choose a shielded M12 connector?
Shielded versions are worth considering when sensor cables run near motors, variable-frequency drives, switching power supplies, or other potential sources of electromagnetic interference.
However, effective shielding depends on the complete connection system, including the cable screen, connector housing, and grounding arrangement.
A shield only works end to end. A shielded cable that terminates into a plastic panel body is unshielded again from that point on. The housing and the grounding path are part of the shield, not accessories to it.
When is an unshielded connector suitable?
Unshielded connectors can be suitable for general sensor and actuator connections when the equipment layout, cable routing, and overall EMC design meet the application requirements.
Always verify the specific shielding configuration rather than relying on the product title alone.
Before selecting an M12 connector, consider these six factors.
| Selection Factor | What to Check |
|---|---|
| Coding & Pin Count | A-coded, 4-pin configuration |
| Gender | Male plug or female socket |
| Mounting Type | Field wireable or panel mount |
| Termination | Screw terminal, solder, or wire leads |
| Shielding | Shielded or unshielded |
| Cable & Protection | Cable length, AWG, cable diameter, and IP rating |
For panel-mount products, also check the mounting thread, panel cutout, panel thickness, and sealing arrangement.
For field-wireable products, check the compatible cable diameter and conductor size.
If your project requires a specific cable length, cable material, pin assignment, or housing design, customized configurations may also be considered.
Renhotec offers several M12 A-coded 4-pin connector configurations to meet different installation and wiring requirements. Whether you need a field-wireable plug, a panel-mount socket, or a cable-connected receptacle, you can choose the appropriate design according to your equipment structure.
Below are four key product configurations from our hot-selling selection.
Best for: On-site cable assembly and industrial sensor connections.
| Attribute | Specification |
|---|---|
| Connector Series | M12 |
| Coding | A-Coded |
| Number of Positions | 4 Pin |
| Gender | Male |
| Orientation | Straight |
| Mounting Type | Cable Mount / Field Wireable |
| Termination | Screw Terminal |
| Shielding | Unshielded |
| Protection Rating | IP67 |
| Rated Current | 4A |
| Rated Voltage | 250V |
Main Advantage: Allows installers to prepare cable lengths and complete connections directly at the installation site.
Best for: Equipment enclosures, control cabinets, and external sensor interfaces.
| Attribute | Specification |
|---|---|
| Connector Series | M12 |
| Coding | A-Coded |
| Number of Positions | 4 Pin |
| Gender | Female |
| Orientation | Straight |
| Mounting Type | Panel Mount / Bulkhead |
| Shielding | Shielded or unshielded options, subject to SKU confirmation |
| Connection Type | Panel receptacle |
| Cable Termination | Confirm according to selected model |
Main Advantage: Provides a fixed M12 connection interface on equipment panels, making external device connections more convenient.
Best for: Internal equipment wiring and control cabinet connections.
| Attribute | Specification |
|---|---|
| Connector Series | M12 |
| Coding | A-Coded |
| Number of Positions | 4 Pin |
| Gender | Female |
| Orientation | Straight |
| Mounting Type | Panel Mount / Bulkhead |
| Shielding | Unshielded |
| Cable Length | 1m |
| Wire Gauge | AWG22 |
| Cable Connection | Pre-attached Wire Leads |
Main Advantage: The pre-attached 1m cable helps simplify connections between the external M12 interface and internal equipment circuits.
Best for: Industrial installations where cable shielding and EMI control are important.
| Attribute | Specification |
|---|---|
| Connector Series | M12 |
| Coding | A-Coded |
| Number of Positions | 4 Pin |
| Gender | Female |
| Orientation | Straight |
| Mounting Type | Panel Mount / Bulkhead |
| Shielding | Shielded |
| Cable Length | 1m |
| Wire Gauge | AWG22 |
| Cable Connection | Pre-attached Wire Leads |
Main Advantage: Provides a shielded connection configuration for equipment installations that require improved electromagnetic compatibility.
| Your Requirement | Recommended Product |
|---|---|
| Flexible on-site cable preparation | Product 1 – Field-Wireable Male Plug |
| Fixed external interface on equipment | Product 2 – Female Bulkhead Receptacle |
| Convenient internal equipment wiring | Product 3 – Non-Shielded Female with 1m Leads |
| Shielded panel connection | Product 4 – Shielded Female with 1m Leads |
The best configuration depends on your mating interface, wiring arrangement, installation space, and environmental requirements. For custom cable lengths, shielding, or termination options, contact Renhotec for product selection support.
M12 A-coded 4-pin connectors provide a practical connection solution for industrial sensors, actuators, and automation equipment.
Whether you need a field-wireable male plug for flexible cable preparation, a female bulkhead receptacle for equipment panel installation, or a shielded cable-connected version for improved EMC design, choosing the right configuration is essential.
Renhotec offers a range of M12 connector options, including different genders, mounting styles, termination methods, and shielding configurations.
Looking for the right M12 A-coded 4-pin connector for your project?
Contact Renhotec with your required connector type, mounting method, cable length, shielding preference, and electrical specifications. Our team can help you identify a suitable solution for your industrial application.