The GX Connector of Aviation Connector

Definition Of GX Connector

Aviation plug socket connector, as the name suggests, refers to the connector components used in the aviation field, and is a general term for connectors in the industry.

There are countless connectors used for power transmission, signal transmission, etc. in the aviation field, and the product range is extremely wide. Therefore, the aviation plug socket does not refer to a model of the plug socket.

Different connector manufacturers that produce connectors for the aviation field are also different. For example, Amphenol AISG, Binder M12, M16, Weipu, etc.

Product Shapes

Plug shape	Socket shape	Docking shape

Product  Type

1.Plugs have the straight and right angle

2.Sockets are available in double-threaded type, single-threaded type (through-wall type), with standard installation and flange type.

Diagram of the Connection Method

A. Standard type connection method:

B. Butt joint connection method:

GX series have different products according to the opening size. The common ones are GX12, GX16, GX20, GX25, GX30, GX35, GX40, etc. (The shape of the product is the same, only the size is different)

The number after GX represents the thread diameter size of the socket.

GX Connector External Dimensions

GX12: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, opening 12mm.

GX16: 2pin 3pin 4pin 5pin 6pin 7pin 8pin 9pin 10pin, openning16mm.

GX20: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 8pin, 9pin, 10pin, 12pin, 14pin, 15pin, opening 19mm.

GX30, DF30: 2pin, 3pins, 4pin, 5pin, 6pin, 7pin, 8pin, 9pin, 10pin, 12pin, 14pin.

GX Connector Flange Type Plugs

The difference lies mainly in the fact that the socket has a round, square, or diamond-shaped flange tray with holes in the tray, which are fixed with screws.

Accessories: waterproof cap

GX20 Flange: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 8pin, 9pin, 10pin, 12pin, 14pin,  15pin.	GX25 Flange: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 8pin, 9pin,  10pin,  12pin,  opening 25mm, female head black bakelite diameter 21mm.	DF30 GX30 M30 Flange: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 8pin, 9pin, 10pin, 12pin, 14 pin  connector, opening diameter (i.e. male diameter) 30mm, female black rubber diameter 25mm.

Note: DF Zhejiang Dengfeng GX series aviation plug, Dengfeng company did earlier, so some people also use DF name.

1. Shell Material: Zinc alloy/copper Nickel plating

    Process: Copper – Turning – Plating Zinc alloy – Die-casting – Plating

2. Needle Material: copper, nickel/gold plating

    Process: Raw material – Turning – Nickel plating – Gold plating

3. Insulator Material: Black Bakelite

    Process: Raw material – Turning

4. Accessories Nuts, gaskets, waterproof rings, protective caps: Rubber

GX Connector Pin Layout

GX series solder type pin number layout

Insulator end face for pins (J)

Front-loading Reverse-loading

Single-sided threaded sockets

Through-wall Socket

GX series are suitable for electrical connection between instruments, electronic equipment, wires, and cables or through the wall partition connection, GX series threaded connection, stable electrical conductivity, and has a certain waterproof function.

Safe and reliable, it was first applied in the aviation field to meet the requirements of moving or vibrating environments. With the development of production technology and cost reduction, the civil field also began to be generally applicable.

Now it is widely used in aviation, navigation, computer, communication, petroleum survey, navigation, anti-theft device, transportation, mechanical electronics, and other fields.

 

RENHOTEC

---

Renhotec Group was established in May 2005, specializing in manufacturing and exporting various electronic connectors for over 15 years. You can get almost all commonly used connectors, adapters, cable assemblies from us at favorable ex-factory prices.

If you have needs for connector products, please contact us by phone or email:

Mobil:(+86)18086610187

Email:[email protected]