Advantages of fiber optic M12 aviation plug

In the future, fiber-optic air plugs will become smaller and smaller, and the cost will be lower and lower, while the performance requirements are getting higher and higher. In the future, a variety of newly developed fiber optic aviation plugs will be used together with traditional aviation plug connectors to provide useful help for China’s communications reconnaissance industry. Let’s talk about the performance parameters of using fiber optic aviation plugs:

M12 8芯航空接头母头弯式装配式螺丝锁线 10PCS

The performance of fiber optic connectors is first of all optical performance, in addition to the interchangeability, repeatability, tensile strength, temperature and number of insertions and removals of fiber optic aviation plugs.

1. Optical performance of fiber optic aviation plugs

The optical performance requirements for fiber optic aviation plugs are mainly the two most basic parameters of insertion loss and return loss.

Insertion loss (InsertionLoss) is the loss of the effective optical power of the link caused by the conduction of the connector. The smaller the insertion loss, the better, and the general requirement should be no more than 0.5dB.

ReturnLoss (ReflectionLoss) refers to the ability of the connector to suppress the reflection of the link optical power, and its typical value should be no less than 25dB. In the practical application of the connector, the surface of the pin has been specially polished to make the return loss larger, generally not less than 45dB.

2. Optical fiber aviation plug interchangeability and repeatability

The fiber optic connector is a universal passive device. For the same type of fiber optic connector, it can be used in any combination and can be used repeatedly. Therefore, the additional loss of the lead is generally less than 0.2 dB.

3, fiber optic aviation plug tensile strength

For a good fiber optic aviation plug, the tensile strength is generally required to be no less than 90N.

4, fiber optic aviation plug temperature

Generally, the fiber optic connector must be able to operate at temperatures between -40oC and +70oC

Leave a Reply

Your email address will not be published. Required fields are marked *